The Level 2 Drag Racing Kit is perfect for owners of 1982-1992 Chevrolet Camaro and Pontiac Firebird (F-body) vehicles who are serious about dragstrip performance but don't want to undertake the drastic measures of back-halving their car. This kit reinforces and stiffens the chassis while shedding critical weight through lightweight control arms and a tubular K-member. Additionally, it provides complete control over traction and suspension characteristics with adjustable coil-over struts and shocks.
ELIMINATE WEIGHT
QA1’s tubular K-member dramatically improves engine bay access while shedding a substantial 30 pounds compared to the stock crossmember. Engine swaps become effortless with the QA1 K-member, and engine mounts are available for big block, small block, LS, and LT engines. The included tubular front lower control arm, engineered specifically for drag racing, eliminates the spring bucket, reducing weight, optimizing horsepower-to-weight ratio, and enhancing launch performance.
PERFORMANCE SHOCK VALVING
Take complete control over the compression and rebound settings on your QA1 front struts and rear shocks, to easily and precisely dial-in how hard your car hits the tire and transfers weight for better traction and quicker ET’s.
ADJUST WHEELBASE & PINION ANGLE
It's typical to use larger diameter wheels and tires for better traction in drag racing. Adjustable trailing arms allow precise positioning of the axle centers to align them in the wheel wells for proper clearance and appearance. QA1 trailing arms are much stiffer than factory parts, reducing deflection and energy loss in your suspension.
ELIMINATE CHASSIS TWIST
The QA1 tubular rear sway bar will keep the rear of the car square to the axle and greatly improve launch characteristics. QA1 subframe connectors significantly enhance the stiffness of the 3rd Gen F-body's unibody frame to prevent flexing and twisting during acceleration.
EASY BOLT-IN INSTALLATION
QA1’s commitment to thoughtful product design is evident in every fully bolt-in kit we produce, which guarantees a hassle-free installation process.
Make sure to pair this kit with the QA1 tunnel mounted torque arm and a transmission crossmember for a huge gain in performance, added longevity, and make it much easier to swap in popular transmission and rear axle upgrades.
MADE IN THE USA
QA1 3rd Gen F-body suspension is proudly made in Lakeville, Minnesota.
LIMITED LIFETIME WARRANTY
QA1 shocks and Struts are eligible for a Limited Lifetime Warranty. For peace of mind, simply register your shocks at QA1.net/Warranty to ensure coverage for as long as you own your vehicle.
FEATURES & BENEFITS
- Tune for improved straight-line performance, resulting in better 60-foot times and ETs
- Significant weight reduction
- Adjustable wheelbase and pinion angle adjustment
- Reduced chassis flex and improved launch
- Easy bolt-in design ensures a straightforward and stress-free installation process.
- Made in the USA.
- Shocks & struts eligible for a limited lifetime warranty.
FITMENT NOTES
Engine mounts not included
QA1 torque arm recommended
Specifications
- Performance LevelLevel 2
