Product Overview
QA1’s Level 2 Drag Kit is a complete solution for F-body owners who drag race their car. This complete solution replaces your entire front and rear suspension, optimizing your car for weight transfer and straight-line performance. The coilovers offer adjustable ride height, while the rear suspension was optimized for wider wheels and tires.
Bind Free, Light-weight Front Suspension
QA1's tubular front control arms stand out as some of the lightest available in the market. Beyond their lightweight design, racers have the flexibility to fine-tune launch characteristics using an adjustable droop stop. The inclusion of QA1's low-friction ball joints and ultra-low-friction composite bushings enhances weight transfer, ensuring smooth and bind-free movement. When paired with QA1's double adjustable Pro-Coil coilovers, this kit offers plenty of control over front-end movement.
Achieve the Perfect Stance.
Factory coil spring and leaf springs limit your ability to achieve the perfect stance on your Camaro or Firebird. Upgrading to QA1’s coilovers and a tubular 4-link provides 0 to -2 inches of adjustability in the front and +2 to -3 inches of ride height adjustability in the rear, letting you dial in exactly the look you want.
Fit Wider Wheels & Tires
Designed to work with both standard and mini-tubs, this system offers generous clearance for up to 11-inch-wide wheels on ’67-’68 F-bodies and 12-inch-wide wheels on your ’69. This enables you to choose the appropriate tire for the class you race, or street/strip combination.
Note: Achieving maximum wheel and tire width will require mini tubs.
Improved Performance and Stability
Perfect for both street and track use, double adjustable shocks are famous for their independent rebound and compression tunability, giving you exceptional off-the-line control for improved 60-foot times.
Easy, Installation & Adjustment
Thoughtful design meets effortless installation with a completely bolt-in front suspension and a 4-link requiring minimal welding. You'll experience a painless installation and setup process, where adjusting ride height, pinion angle, or wheelbase is as simple as a few tweaks – no link removal required. No modifications to floor pan required.
Note – Welding required
Best In-Class Lifetime Warranty
Register at QA1.net/warranty for lifetime coverage of your QA1 shocks.
Made in the USA
QA1 suspension is proudly made in Lakeville, Minnesota.
Fitment Notes
Wheel and tire fitment should be verified on the vehicle
Welding Required
Includes Spanner Wrench
QA1 Subframe Connectors strongly recommended
May require Exhaust Modification
Specifications
- Performance LevelLevel 2
