QA1’s Level 3 Handling Kit is a complete solution for F-body owners looking for ultimate track-day performance. This complete solution replaces your entire front and rear suspension, optimizing handling performance, while still maintaining comfort on the street. The coilovers offer adjustable ride height, while the rear suspension was optimized for wider wheels and tires.
Bind Free, Light-weight Front Suspension
QA1's tubular front control arms stand out as some of the lightest available in the market. QA1 low-friction ball joints have 1” longer upper ball joint studs to improve camber gain and overall cornering grip. Ultra-low-friction composite bushings eliminate flex and deliver bind-free movement. When paired with QA1's 4-way adjustable MOD Series coilovers, and tubular front sway bar, this kit offers plenty of control over your suspension.
Achieve the Perfect Stance
Factory coil springs and leaf springs limit your ability to achieve the perfect stance on your Camaro or Firebird. Upgrading to QA1’s coilovers and a tubular 4-link provides 0 to -2 inches of adjustability in the front and +2 to -3 inches of ride height adjustability in the rear, letting you dial in exactly the look you want.
Fit Wider Wheels & Tires
Designed to work with both standard and mini-tubs, the rear system offers generous clearance for up to 11-inch-wide wheels on ’67-’68 F-bodies and 12-inch-wide wheels and 335 tires on your ‘69. This results in a significantly more aggressive stance and improved traction and performance.
Note: Achieving maximum wheel and tire width will require mini tubs.
Improved Performance and Stability
4-way adjustable MOD shocks help drivers find grip in any setting. They make it easy to adapt to different events like autocross, road courses, speed stop challenges and more by changing out valve packs in minutes. It's also simple to go from race-oriented suspension to comfortable street driving between events.
Easy, Installation & Adjustment
Thoughtful design meets effortless installation with a completely bolt-in front suspension and a 4-link requiring minimal welding. You'll experience a painless installation and setup process, where adjusting ride height, pinion angle, or wheelbase is as simple as a few tweaks – no link removal required. No modifications to floor pan required.
Note – Welding required
Made in the USA
QA1 suspension is proudly made in Lakeville, Minnesota.
FITMENT NOTES
Wheel and tire fitment should be verified on the vehicle
Welding Required
Includes Spanner Wrench
QA1 Subframe Connectors strongly recommended
May require Exhaust Modification
Specifications
- Performance LevelLevel 3
- Includes ShocksYes
